CHIP CONVEYOR FOR CNC TURNING CENTRES:

SAAB CHIP CONVEYORS are the best alternative to manual chips removal as well as for chain and link type conveyor. The design is quite simple and trouble free. Specially this conveyor does not get jammed under heavy burrs compared to the chain and link type conveyor available in the market.

BENEFITS

» The tool life increased due to the coolant retaining its optimal concentration and viscosity
» The frequency of top up of coolant reduced.
» The coolant life increased dramatically.
» Operator injury reduced due to non-handling of swarf manually which is collected in a drum cut in half behind the machine or a trolley.
» Cleanliness and housekeeping improved overall on the shop floor.
» There will be a considerable saving of time for machine cleaning. We have found a minimum of half an hour saving per shift of eight hours.
» When swarf accumulates in the machine there is a chance of the swarf getting entangled in the rotating chuck and the component on the chuck getting rejected. This would be eliminated due to the chip Conveyor continuously removing swarf from the machine and preventing the buildup of swarf.

CHIP CONVEYOR VIDEO

USED IN A CNC TURNING CENTRE